Indicates properties, such as IDs, names etc. which are used to identify objects, processes etc.
Specific textual input (such as comments, descriptions) is attached to any kind of entity
A reference, that indicates that something is defined by something else. E.g. the location/shape of a geometric feature is defined by the CAD file.
E.g. a process quantity or material data set is representative for a certain temporal state of an object
Any kind of aluminium material (e.g. an alloy or high purity aluminium)
Any kind of analysed data set. This usually means, that it is the result of some kind of postprocessing/analysis process of a raw data file.
The process of analysing the resulting spectra from some kind of spectroscopy process and comparing them to reference spectra (e.g. in a LIBS process)
An area detector, e.g. used in a computer tomograph
The duration of the artificial aging process
The duration of the artificial aging process as supposed.
The temperature controlled during artificial aging
The artificial aging temperature as supposed
An average value of several Brinell hardness measurements
The average value of a series of hardness measurements according to the Vickers indentation process
Is the base element of a chemical composition, e.g. Ni in Ni-alloys, Al in Al-alloys.
An indentation process according to Brinell
Any kind of Brinell testing equipment/machine
The act of casting the melt into the mold.
Applied pressure during the casting process
Casting related subprocesses, that are not described within PrimaryShapingOfLiquidState (e.g. the act of melting, the act of casting the melt into the mold...)
Temperature of the melting at the moment the casting process starts (as is)
Temperature of the melting during casting as supposed????
Characteristic length of the discretization in a finite difference code for cast simulations (e.g. Flow3D)
Symbol of a chemical element (e.g. H for hydrogen, Si for silicon Al for Aluminium, Fe for iron)
Characteristic velocity of a turning process (circumferential velocity)
Some kind of component test applying a compressive load
Some kind of component test applying a tensile load
Any kind of quantity, that describes the composition of materials
Consumables are products that consumers use recurrently, i.e., items which "get used up" or discarded.
A structural quantity related to some kind of consumable
Class defined by the Basic Formal Ontology (BFO)
The process of cooling any kind of object
Cooling emulsion containing water and oil used for wire eroding
Displacement of the crosshead, e.g. in a tensile test
The displacement of the machine crosshead after fracture
Displacement of the crossheads per time (e.g. in a tensile test)
The temperature of the crucible as supposed during the casting process
The process of evaluating some kind of data
The process of exporting data (e.g. from a output file generated by some simulation software)
Depth of cut is a process quantity for a turning process characterizing the depth of the machined cut.
A digital camera used within a process setup
A drilled hole in a technological product.
An EBSD (electron backscatter diffraction) detector for the SEM
Electric current applied during a wire eroding process
Machine used for an electric discharge process (e.g. wire eroding)
Metallographic empbedding compound (e.g. resin)
Equipment or machine used to embed a metallographic specimen in an embedding compound (e.g. resin)
Process of embedding a metallographic specimen in e.g. bakelite resin or epoxy resin
The engineering strain in loading direction (e.g. in a uniaxial tensile test)
The engineering stress: Force/OriginalArea
The engineering stress component in loading direction (e.g. in a uniaxial tensile test)
Etchant, e.g. used to etch metallographic specimens
Time duration to etch a metallographic specimen
Characteristic speed within a turning process to advance the cutting tool
Part of an object, which can be identified, even though there is no break in physical continuity (e.g. nose in the face).
Some kind of field data (tables, columns, matrices...)
A fractographic analysis process, which typically includes other microscopy processes.
Fume hood to suck off toxic gases in the air, e.g. during etching of metallographic specimens.
Data set containing geometric information content
Grinding and polishing equipment (e.g. used for metallographic specimen preparation)
Suspension used during grinding or polishing of metallographic specimens (e.g. diamond suspension)
Any kind of hardness testing equipment/machine (e.g. Brinell, Vickers, Rockwell)
The hardness determined by a Vickers indentation process
Heat resistant gloves, e.g. used to remove objects from a heat treatment furnace.
Heat transfer coefficient between melt and atmosphere
Heat transfer coefficient between melt and mold
Heat transfer coefficient between mold and atmosphere
Heat transfer coefficient between solidified metal and atmosphere
A furnace used for the heat treatment of objects
The process of heating any kind of object
Permanent and unique ID for specimens at the Fraunhofer IWM
Permanent ID for microsections at the Fraunhofer IWM
An image generation process, e.g. during tomography
Metadata set included in images. E.g. microscopes write the process specific metadata into the image file.
A series of images, that form a vertical stack (e.g. a series of images generated by tomography).
The process of importing CAM data and mounting a machine
Duration of the application of the indentation force during Brinell testing
Applied indentation force within the Brinell indentation process
An inert gas atmosphere in some kind of chamber, which is used within a process
Any kind of information content entity (e.g. files, data sets...)
An ingot is often used as raw material for a casting process
ID of an ingot (e.g. used as raw material for a casting process)
Initial mold temperature in e.g. a casting simulation
An inlens selected backscatter detector for the SEM
An inlens secondary electron detector for the SEM
An input file is a file with no specific file ending, that is used as input for a simulation
The process of generating an input file for a simulation
A heating furnace, that is integrated in the casting machine
A measurement system for the laser induced plasma spectroscopy (LIBS) process
A laser induced plasma spectroscopy process: Minimal invasive process to measure the chemical composition on the material surface (or in a small volume) in high speed.
A line detector, e.g. used in a computer tomograph
A tank filled with liquid nitrogen (e.g. used at a scanning electron microscope)
Local process time. Local refers to the local machine time or to a reference time at the start of the process.
Preparation process of some kind of machine
Machine specific software, e.g. used to control the process or acquire data
The process of marking and labeling any kind of blank according to some kind of withdrawal plan
A data set containing material specific data
Maximum value of the melt temperature measured during a casting process.
The maximum value of a tensile force (e.g. in a tensile test)
The location (a point) at which some quantity is measured
Measurement range: The area/volume in which the measurement is performed.
Measurement related fiat object part, e.g. measurement range or measurement location
A workshop dealing with mechanical manufacturing processes such as turning, wire eroding, separating, sawing...
Any kind of equipment within a mechanical workshop
The act of melting a solid state material within a casting process
Equipment used within metallographic processes (e.g. polishing, grinding, embedding...)
Grinding disc/wheel used for metallographic specimen preparation
Microscope related accessory (e.g. light fixture, object lenses...)
Microscope related equipment as microscopes and accessories
Temperature of the mold as is during permanent mold casting
Temperature of the mold as supposed during permanent mold casting
The process of mounting a machine with any kind of object (e.g. a turning machine)
The process of mounting some kind of test piece in a testing machine
Equipment used for nondestructive testing
Quantities related to nondestructive testing processes
An optically measured displacement as is e.g. by using digital image correlation
Any kind of optical strain measurement system (e.g. Aramis)
Original cross-sectional area of the parallel length (e.g. according to DIN ISO 6892-1:2017-02)
permanent elongation of the gauge length after fracture, (Lu − Lo), expressed as a percentage of the original gauge length
Percentage plastic extension at maximum force.
The permanent mold, into which the melt is casted. Permanent refers to the fact, that the mold is used several times (in industrie ca. 100,000 times)
Permanent mold casting, i.e. a permanent (e.g. copper or steel) mold is used
Some kind of personal protective equipment
A series of images taken in a plane, which form a set of images (e.g. images of a microsection or a fracture surface)
Power of x-ray tube (e.g. in a computer tomograph)
The phase fraction of some kind of precipitate.
A preliminary applied force, e.g. in a tensile test to ensure the alignment of the test piece and the grip system.
A preliminary applied stress, e.g. in a tensile test to ensure the alignment of the test piece and the grip system.
Name of a procedure (e.g. norm, standard, internal procedure)
Any kind of data set, that is the output of a process (e.g. raw data, analysed data, files, quantities...)
The process of executing any kind of process
A set of parameters, that is used to control a process. Those are usually quantities of type "as supposed".
Name of the producer of any kind of product
Physikalische und nichtphysikalische Größen
A wall to protect humans from radiation, e.g. x-ray
Any kind of raw data set. Raw data refers to the original data set.
The process of removing a specimen from a testing machine
The process of removing any kind of object from a machine.
A round blank (a cylinder shaped object with height typically smaller than diameter)
The act of separating the cast part from the mold.
A multiplication factor (unitless), that determines the volume during solidification in Flow3D
Time duration between a fully liquid material state and a fully solidified material state during cooling.
Solution annealing is used to homogenize the material. The temperature is sufficiently high to deliberately dissolve certain phases (e.g. gamma' in superalloys)
The duration of the solution annealing process, i.e. of the time spent at the solution annealing temperature
The duration of the solution annealing process as supposed.
The temperature at which the solution annealing process is performed
The solution heat treatment temperature as supposed
Any kind of specific data format, e.g. file types like .txt, .xls, .png, .pdf, ...
Specification of the analysed chemical elements in a LIBS (laser induced plasma spectroscopy) process.
Some kind of spectroscopy (interaction between matter and electromagnetic radiation) process
Superimposed vibration during the casting process
The process of finishing the surface of some kind of object (e.g. polishing, grinding...)
A site related to a technological product
The process of executing any kind of test
Camera to measure the surface temperature of objects
A thermocouple is an electrical device consisting of two dissimilar electrical conductors forming an electrical junction. A thermocouple produces a temperature-dependent voltage as a result of the thermoelectric effect, and this voltage can be interpreted to measure temperature. Thermocouples are a widely used type of temperature sensor.
Any kind of three dimensional field data
Three dimensional x-ray computer tomography
Time duration until the start of the casting process since the mold has been positioned
Time duration until the mold chamber is flooded
Time duration during a casting process until the induction heating system is switched off since the start of the casting process
A turning machine to perform a turning process
The tool used to machine the object within a turning process
The radius at the edge of a turning tool
Any kind of two dimensional field data, e.g. an Excel sheet, a table...
An indentation process according to Vickers
A data set containg the information content of a withdrawal plan (e.g. PDFFile, CADFile...)
X coordinate of cartesian coordinate system
An x-ray tube, e.g. used in a computer tomograph
Y coordinate of cartesian coordinate system
Z coordinate of cartesian coordinate system